Preparing A Solaris Server For Nsm; Upgrading Nsm In A Standalone Configuration - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide

Preparing a Solaris Server for NSM

Upgrading NSM in a Standalone Configuration

140
Perform these steps if you plan to upgrade NSM on a Solaris 10 server:
Install required locale files.
1.
Use the following command to check which locale files are currently installed:
/usr/bin/locale –a
Ensure that the following locales are installed. If you have all required locales, proceed
to Step 2.
C
POSIX
en_CA
en_CA.ISO8859-1
en_CA.UTF-8
en_US
en_US.ISO8859-1
en_US.ISO8859-15
en_US.ISO8859-15@euro
en_US.UTF-8
es
es.UTF-8
es_MX
es_MX.ISO8859-1
es_MX.UTF-8
fr
fr.UTF-8
fr_CA
fr_CA.ISO8859-1
fr_CA.UTF-8
iso_8859_1
Use the Solaris 10 installation DVD to load any missing locales. The minimum supported
Solaris 10 revision is 6/06. You can download the DVD from
the DVD (in this example,
/usr/sbin/pkgadd -d /solaris/Solaris_10/Product SUNWladm
/usr/sbin/localeadm -a en_US -d /solaris/Solaris_10/Product
Edit the
/etc/default/init
2.
LC_COLLATE=en_US.UTF-8
LC_CTYPE=en_US.UTF-8
LC_MESSAGES=C
LC_MONETARY=en_US.UTF-8
LC_NUMERIC=en_US.UTF-8
LC_TIME=en_US.UTF-8
Reboot the Solaris server.
3.
/usr/sbin/reboot
To upgrade to NSM 2010.4 on a standalone system:
/solaris ) and issue the following commands:
file to include the following lines:
. Mount
www.sun.com
Copyright © 2010, Juniper Networks, Inc.