Extended HA Configuration Parameters
Shared Disk Parameters
Copyright © 2010, Juniper Networks, Inc.
Table 13: Simple HA Configuration—System Parameters (continued)
Parameter
Description
Device Server
Parameters required for the Postgres Database used
Database Parameters
for the Device Server. You must specify a port number,
superuser name and password. By default, the Postgres
Database uses port 5432; the superuser is "nsm" .
Table 14 on page 83 describes additional system parameters that you need to identify
to install HA with the Device Server and GUI Server on separate server machines:
Table 14: Extended HA Configuration—System Parameters
Parameter
Description
Device Server ID
Unique ID assigned when you add the Device Server.
Password for GUI
Password assigned to the Device Server enabling it to
Server Connection
authenticate with the GUI Server when attempting to
connect.
If you are using a shared disk partition, the installer prompts you to configure additional
information. Table 15 on page 83 identifies the additional system parameters that you
need to identify to install HA with access to a shared disk.
Table 15: Shared Disk System Parameters
Parameter
Description
Command to mount
The command to mount the shared data partition.
the shared disk
The default command is:
partition
Command to unmount
The command to unmount the shared data partition.
the shared disk
Before configuring this command, you must first verify
partition
that you have defined your mounts properly.
The default command is:
Command to check the
The command to check the integrity on the shared data
integrity of the shared
partition.
data partition
The default command is:
Directory path for the
Directory path of the shared disk mount point.
shared disk
Chapter 5: Installing NSM with High Availability
/bin/mount /var/netscreen/DevSvr
/bin/umount /var/netscreen/DevSvr
/sbin/fsck
Your Value
Your Value
Your Value
83
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?
Questions and answers