Installing Nsm 2010.4 On The Primary Server - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide

Installing NSM 2010.4 on the Primary Server

86
Change the permissions of the .ssh directory on each machine to owner-only, using
6.
the following command:
chmod -r 0700 ~/.ssh
Validate that you do not receive a prompt to enter a password to access the secondary
7.
server.
If you do receive a password prompt, the remote database replication will not function
properly. Check for errors in the steps for establishing a trust relationship and repeat
the process from Step 1.
We recommend that you test the successful completion of this part of the installation
process by opening an SSH connection to the peer server.
After you have successfully performed all prerequisite steps, you can install NSM 2010.4
on your primary server.
To install the primary server with high availability (HA) configured:
Load the installer software onto the server where you want to use NSM. You can run
1.
the installer directly from the NSM installation CD, copy the installer to a directory on
the server, or download the installer from the Juniper Networks Customer Services
Online Web site.
Navigate to the directory where you saved the installer file. We recommend that you
2.
save the installer in the
Run the management system installer.
3.
On Linux, run the following command:
sh nsm2010.4_servers_linux_x86.sh
On Solaris, run the following command:
sh nsm2010.4_servers_sol_sparc.sh
The installation begins automatically by performing a series of preinstallation checks.
The installer ensures that:
The OS version and specified architecture are compatible.
You are installing the correct software for your operating system.
All of the needed software binaries and packages are present.
If any component is missing, the installer displays a message identifying the missing
component:
Checking for platform-specific packages.....................FAILED
The Following list of Packages are Required for NSM installation.
Please install the system update utility before continuing.
chkfontpath
You have the correct version of the PostgreSQL database.
/tmp subdirectory.
Copyright © 2010, Juniper Networks, Inc.