Figure 4: Ui Installation-Preinstallation Summary - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide
44
Figure 4: UI Installation—Preinstallation Summary
Verify that the information is correct. To make a change to any of the previous
7.
configuration options, click Previous. When you are satisfied that the information is
correct for this installation, click Install. The installer proceeds to install the software
files for the UI.
If you do not have a default web browser configured, then the Select Browser screen
8.
appears. Click Choose to navigate to the subdirectory where your web browser
software files are located. Click Next to continue. When the installation is complete,
a screen indicating "Install Complete" appears.
NOTE: If you do not select a default web browser, then the UI is not able
to launch the NSM online help. If you still want to use the online help, then
you can configure your web browser using the Preferences menu from the
UI.
Click Done to exit the installation program.
9.
The installer generates a log file with information describing the context of the installation
process. For troubleshooting purposes, you might need to access it. The installation log
is saved by default in the following directory locations:
For Windows-based computers:
C:\Documents and Settings\<user name>\.nsm\
For Linux-based computers:
Copyright © 2010, Juniper Networks, Inc.