Data Migration From A Linux Server To An Nsm Regional Server Appliance - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Data Migration from a Linux Server to an NSM Regional Server Appliance

Copyright © 2010, Juniper Networks, Inc.
Hit ENTER or return to continue...
1. Display all domains with domain-id
2. Display all category names
3. Display tuples in a category across all domains
4. Display tuples in a category for a single domain
5. View/Edit record by category.doc-id
6. View/Edit record by domain-id.category.tuple-name
7. View/Edit record by domain-id.category.tuple-id
8. View Reference DB
9. Change DB version (Disabled in RW mode)
10. Insert a record by domain-id.category
11. Delete a record by domain-id.category.tuple-id
12. Quit
Enter choice number: 7
Enter tuple-name in format domain-id.category.tuple-id: 0.server.0
<Esc>:wq to write and quit.
<Esc>:q! to just quit and not write.
View and make note of the client one-time password in the shadow_server table:
8.
Option 70.shadow_server.1
<Esc>:q! to just quit and not write
Exit the
xdbViewEdit.sh
9.
Change the one-time password in
10.
shadow_server table:
Use the vi editor to edit the
a.
Change the one-time password to match the one-time password from the
b.
shadow_server table.
Delete the
ourRsaPrivateKey
c.
Start the HaSvr, GuiSvr, and DevSvr processes by entering the following command:
11.
/usr/netscreen/HaSvr/bin/haSvr.sh start
This section describes porting data from an existing Linux server to an NSM appliance.
This section makes the following assumptions:
The IP address of the existing Linux server will be assigned to the new NSM appliance
server.
The versions of NSM are the same on the current Linux installation and the NSM
appliance. If the versions are different, you must upgrade the Linux server to the NSM
version that is running on the NSM appliance before migrating your data.
Chapter 7: Upgrading NSM Appliances to NSM 2010.4
editor.
devSvr.cfg to match the one-time password in the
/var/netscreen/DevSvr/devSvr.cfg
and
theirRsaPublicKey
file.
lines in .
devSvr.cfg
167