Network and Security Manager Installation Guide
Shared Disk Parameters
136
Table 19: HA Configuration — System Parameters (continued)
Parameter
Description
Hour of the Day to
Time of day that you want the GUI Server to backup the
Start Local Database
database. Type a 2 digit number representing the time
Backup
of day in a 24 hour clock notation (00 through 23). For
example, if you want the backup to begin at 4:00 AM,
type 04; if at 4:00 PM, type 16. We recommend that
you set this parameter to a time of day that effectively
minimizes your network downtime. The GUI Server
completes the daily backup process within the hour
specified every day.
By default, the GUI Server performs the daily backup
within an hour after 2 AM.
Number of Local
Total number of database backup files that the GUI
Database Backup Files
Server stores. When the GUI Server reaches the
Stored
maximum number of backup files you configure, it
overwrites the oldest file.
By default, the GUI Server stores seven backup files.
Table 20 on page 136 identifies the additional system parameters that you need to identify
to upgrade the management system with HA enabled with access to a shared disk:
Table 20: Shared Disk Parameters
Parameter
Description
Command to mount
The command to mount the shared data partition.
the shared disk
The default command is:
partition
Command to unmount
The command to unmount the shared data partition.
the shared disk
Before configuring this command, you must first verify
partition
that your mounts are defined properly.
The default command is:
Command to check the
The command to check the integrity on the shared data
integrity of the shared
partition.
data partition
The default command is:
Directory path for the
Directory path of the shared disk mount point.
shared disk
/bin/mount /var/netscreen/DevSvr
/bin/umount /var/netscreen/DevSvr
/sbin/fsck
Your Value
Your Value
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?