Table of Contents
Advertisement
Running the User Interface
Validating the NSM Installation
Copyright © 2010, Juniper Networks, Inc.
/<install_user_homedir>/.nsm/
NOTE: The .nsm subdirectory is a hidden subdirectory on Linux systems.
The Installation log file is named:
After you have completed installing the UI, you can launch the application and verify that
you can connect to the management system.
The first time you open the UI, you need to specify the host name (or IP address) of the
management system that you want to connect to, a username, and password. The default
username for new installations is "super"; the default password is the password you
specified when configuring the management system. Passwords and usernames are
case sensitive.
To log in to the UI for the first time:
Run the NSM UI.
1.
If you are running the UI on a Windows-based PC, then double-click on the NSM icon.
If you are running the UI on a Linux-based computer, then launch it by double clicking
on the NSM application icon (specify that you want to run the program) or launch it
from a command line. From the command line, navigate to the subdirectory where
you have installed the UI software files, and then launch the UI application by running
the shell archive script provided. The Login window appears.
Verify that the username in the Login field provided is the initial admin user called
2.
"super". If not, type super in the Login field.
In the password field, type the password that you specified when you installed the
3.
management system.
In the server field, type the IP address you assigned to the GUI Server. If you have
4.
enabled DNS lookup, then type the host name instead of the IP address.
Click OK.
5.
The UI appears indicating that the installation was successful.
After you have installed the management system and UI, We recommend that you
validate basic information configured on the Device Server. You can use the Server
Manager to view and edit your configuration on the management system.
To validate your configuration on the Device Server:
Chapter 3: Installing NSM in a Standalone Configuration
_out.date/time stamp.dat
45
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?