Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 155

Copyright © 2010, Juniper Networks, Inc.
Table 17: Standalone Configuration—System Parameters (continued)
Parameter Description
Management IP The IP address used by the running GUI Server.
address
The default is the IP address of the machine that you
are installing on.
https port The port number for listening for messages from the
NSM API. The range is from 1025 through 65535. The
default value is 8443.
Initial "super" user The password required to authenticate the initial user
password in the system. By default, the initial superuser account
receives all administrative privileges in the system.
One-time GUI Server A password that authenticates the server to its peers
password in a high-availability configuration, or authenticates a
regional server with a central manager.
Configuration file Configures a user and password for NSM to perform
management configuration file management operations, and a
password corresponding UNIX user and password. The NSM and
UNIX passwords must be identical.
Local database backup Directory location where local database backup data
directory is stored.
By default, the GUI Server stores local database backup
data at:
/var/netscreen/dbbackup/
Path to the rsync utility Path to the rsync utility executable file.
executable file
The default path is:
/usr/bin/rsync
Remote Backup IP address of the machine where remote backups are
Machine IP Address sent.
By default, the installer sets this to the IP address of
the secondary HA Server.
Hour of the Day to Time of day that you want the GUI Server to backup the
Start Local Database database. Type a 2 digit number representing the time
Backup of day in a 24 hour clock notation (00 through 23). For
example, if you want the backup to begin at 4:00 AM,
type 04; if at 4:00 PM, type 16. We recommend that
you set this parameter to a time of day that effectively
minimizes your network downtime. The GUI Server
completes the daily backup process within the hour
specified every day.
By default, the GUI Server performs the daily backup
within an hour after 2 AM.
Chapter 6: Upgrading to NSM 2010.4 from an Earlier Version
Your Value
133