Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 150

Network and Security Manager Installation Guide
128
Will this machine require local database backups? (y/n) [y]>
Enter hour of day to start the database backup (00 = midnight, 02 = 2am, 14 = 2pm
...)[02]>
Will daily backups need to be sent to a remote machine? (y/n) [n]>
Enter number of database backups to keep [7]>
Enter the rsync backup timeout [3600]>
########## DEVSVR DB SETUP DETAILS ##########
Enter Postgres DevSvr Db port [5432]>
Enter Postgres DevSvr Db super user [nsm]>
Enter Postgres DevSvr Db password for user 'nsm'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
########## POST-INSTALLATION OPTIONS ##########
NOTE: Do not start up the Device Server unless you have already added it to
the system from the UI.
Start High Availability daemon processes when finished? (y/n) []> n
########## CONFIRMATION ##########
About to proceed with the following actions:
- Install Device Server
- Install High Availability Server
- Store base directory for management servers as /usr/netscreen
- This machine participates in an HA cluster
- This server is the primary: No
- Store Device Server data in /var/netscreen/DevSvr
- Connect to GUI Server at 10.150.41.10:7801
- IP address for the primary HA Server: 10.150.41.7
- IP address for the secondary HA Server: 10.150.41.8
- Set shared password for heartbeat
- Number of Heartbeat links: 1
- IP address for this machine's primary heartbeat link: 10.150.43.8
- IP address for the peer's primary heartbeat link: 10.150.43.7
- IP address for remote HA replications: 10.150.41.7
- Port for HA heartbeat communication: 7802
- Seconds between heartbeat messages: 15
- Missing heartbeat messages: 4
- Outside pingable IP address: 10.150.47.254
- Become primary in the event of a tie: n
- HA rsync command replication timeout: 3600
- Create database backup in /var/netscreen/dbbackup
- Use rsync program at /usr/bin/rsync
- Path for the ssh command: /usr/bin/ssh
- Local database backups are enabled
- Start backups at 02
- Daily backups will not be sent to a remote machine
- Number of database backups to keep: 7
- HA rsync command backup timeout: 3600
- Postgres DevSvr Db Server port: 5432
- Postgres DevSvr Db super user: nsm
Copyright © 2010, Juniper Networks, Inc.