Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 58

Network and Security Manager Installation Guide
36
########## GATHERING INFORMATION ##########
1) Install Device Server only
2) Install GUI Server only
3) Install both Device Server and GUI Server
Enter selection (1-3) []> 3
Do you want to do NSM installation with base license? (y/n) [y]>
Enter base directory location for management servers [/usr/netscreen]>
Enable FIPS Support? (y/n) [n]>
########## GENERAL SERVER SETUP DETAILS ##########
Will this machine participate in an HA cluster? (y/n) [n]>
########## DEVICE SERVER SETUP DETAILS ##########
The Device Server stores all of the user data under a single directory.
By default, this directory is /var/netscreen/DevSvr. Because
the user data (including logs and policies) can grow to be quite
large, it is sometimes desirable to place this data in another
partition.
Please enter an alternative location for this data if
so desired, or press ENTER for the location specified in the
brackets.
Enter data directory location [/var/netscreen/DevSvr]>
########## GUI SERVER SETUP DETAILS ##########
The GUI Server stores all of the user data under a single directory.
By default, this directory is /var/netscreen/GuiSvr. Because
the user data (including database data and policies) can grow to be quite
large, it is sometimes desirable to place this data in another
partition.
Please enter an alternative location for this data if
so desired, or press ENTER for the location specified in the
brackets.
Enter data directory location [/var/netscreen/GuiSvr]>
The GUI Server stores all of the database logs under a single directory.
By default, this directory is /var/netscreen/GuiSvr/xdb/log. Because
the database log can grow to be quite
large, it is sometimes desirable to place this log in another
partition.
Please enter an alternative location for this log if
so desired, or press ENTER for the location specified in the
brackets.
Enter database log directory location [/var/netscreen/GuiSvr/xdb/log]>
Enter the management IP address of this server [10.157.48.108]>
Enter the https port for NBI service [8443]>
Setting GUI Server address and port to 10.157.48.108:7801 for Device Server
Please enter a password for the 'super' user
Enter password (password will not display as you type)>
Copyright © 2010, Juniper Networks, Inc.