Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 122

Network and Security Manager Installation Guide
100
- This server is the primary: Yes
- Store Device Server data in /var/netscreen/DevSvr
- Store GUI Server data in /var/netscreen/GuiSvr
- Store GUI Server database log in /var/netscreen/GuiSvr/xdb/log
- Use IP address 10.150.41.9 for management
- Use port 8443 for NBI Service
- Connect to GUI Server at 10.150.41.19:7801
- Set password for 'super' user
- CFM user: cfmuser
- CFM Password set for 'cfmuser'
- IP address for the primary HA Server: 10.150.41.9
- IP address for the secondary HA Server: 10.150.41.10
- Set shared password for heartbeat
- Number of Heartbeat links: 1
- IP address for this machine's primary heartbeat link: 10.150.42.9
- IP address for the peer's primary heartbeat link: 10.150.42.10
- IP address for remote HA replications: 10.150.41.10
- Port for HA heartbeat communication: 7802
- Seconds between heartbeat messages: 15
- Missing heartbeat messages: 4
- Outside pingable IP address: 10.150.47.254
- Become primary in the event of a tie: y
- HA rsync command replication timeout: 3600
- Create database backup in /var/netscreen/dbbackup
- Use rsync program at /usr/bin/rsync
- Path for the ssh command: /usr/bin/ssh
- Local database backups are enabled
- Start backups at 02
- Daily backups will not be sent to a remote machine
- Number of database backups to keep: 7
- HA rsync command backup timeout: 3600
- Postgres DevSvr Db Server port: 5432
- Postgres DevSvr Db super user: nsm
- Postgres DevSvr Db password set for 'nsm'
- Start High Availability daemon processes when finished: No
Are the above actions correct? (y/n)> y
########## PERFORMING INSTALLATION TASKS ##########
----- INSTALLING Device Server -----
Looking for existing RPM package............................ok
Removing existing Device Server RPM.........................ok
Installing Device Server RPM................................ok
Installing JRE..............................................ok
Installing GCC..............................................ok
Creating var directory......................................ok
Creating /var/netscreen/dbbackup............................ok
Putting NSROOT into start scripts...........................ok
Filling in Device Server config file(s).....................ok
Setting permissions for Device Server.......................ok
----- Setting up PostgreSQL for DevSvr -----
Setting up PostgreSQL for DevSvr............................ok
Installation of Device Server complete.
----- INSTALLING GUI Server -----
Looking for existing RPM package............................ok
Removing existing GUI Server RPM............................ok
Installing GUI Server RPM...................................ok
Installing JRE..............................................ok
Installing GCC..............................................ok
Copyright © 2010, Juniper Networks, Inc.