Table of Contents
Advertisement
Network and Security Manager Installation Guide
Distributed Configuration Parameters
HA Configuration Parameters
134
Table 17: Standalone Configuration—System Parameters (continued)
Parameter
Description
Number of Local
Total number of database backup files that the GUI
Database Backup Files
Server stores. When the GUI Server reaches the
Stored
maximum number of backup files you configure, it
overwrites the oldest file.
By default, the GUI Server stores seven backup files.
Table 18 on page 134 describes additional system parameters that you need to identify if
you are upgrading a distributed configuration of the management system — GUI Server
and Device Server on separate server machines:
Table 18: Distributed Configuration — System Parameters
Parameter
Description
Device Server ID
Unique ID assigned when you add the Device Server.
Password for GUI
Password assigned to the Device Server enabling it to
Server Connection
authenticate with the GUI Server when attempting to
connect.
Table 19 on page 134 describes the system parameters that you need to identify if you are
upgrading a standalone configuration of the management system with HA enabled:
Table 19: HA Configuration — System Parameters
Parameter
Description
Primary HA Server IP
IP address of the primary server participating in the HA
address
cluster.
Secondary HA Server
IP address of the secondary server participating in the
IP address
HA cluster.
HA replications
Time interval with which you want the GUI Server to
replicate the database.
By default, the GUI Server replicates the database every
60 minutes.
Heartbeat links
Number of heartbeat communication paths between
between primary and
the primary and secondary machine.
secondary machine
By default, only one communication link exists between
the primary and secondary machines.
Your Value
Your Value
Your Value
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?