•
dsa—DSA key.
Default Configuration
By default, there are no keys.
Command Mode
SSH Public Key Chain Configuration mode
User Guidelines
•
Follow this command with the key-string command to specify the key.
Example
The following example enables a SSH public key to be manually configured for the SSH public key
chain called "bob".
Console(config-pubkey-chain)# user-key bob rsa
Console(config-pubkey-key)# key-string row key-string
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl
key-string
The key-string SSH Public Key-String Configuration mode command manually specifies a SSH
public key.
Syntax
key-string row key-string
•
row—Specify SSH public key row by row
•
key-string—UU-encoded DER format is the same format in authorized_keys file used by
OpenSSH.
Default Configuration
By default, the keys do not exist.
Command Mode
SSH Public Key-string configuration
User Guidelines
•
Use the key-string row command to specify the SSH public key row by row. Each row must
begin with the key-string row command. This command is useful for configuration files.
•
UU-encoded DER format is the same format in authorized_keys file used by OpenSSH.
297
SSH Commands