Figure 6-25. Add a Static IP Interface
Network Mask — Indicates the subnetwork mask of the source IP address.
3
Complete the fields on the page.
4
Click Apply Changes.
The new IP address is added to the interface, and the device is updated.
Modifying IP Address Parameters
1
Open the IP Interfaces Parameters page.
2
Select an IP address in the IP Address drop-down menu.
3
Modify the interface type.
4
Click Apply Changes.
The parameters are modified, and the device is updated.
Deleting IP Addresses
1
Open the IP Interfaces Parameters page.
2
Click Show All.
The IP Interface Parameters Table page opens:
Figure 6-26. IP Interface Parameter Table
3
Select an IP address and select the Remove check box.
4
Click Apply Changes.
The selected IP address is deleted, and the device is updated.
138
Configuring System Information