Sfp Ports; Rs-232 Console Port; Figure 2-4. Powerconnect 3448 Back Panel; Figure 2-5. Console Port - Dell PowerConnect 3424 User Manual

Powerconnect 34 series
Hide thumbs Also See for PowerConnect 3424:
Table of Contents

Advertisement

There are two buttons on the front panel. The Stack ID button is used to select the unit number.
The second button is the Reset Button which is used to manually reset the device. The Reset
button does not extend beyond the unit's front panel surface, so reset by pressing it accidentally is
prevented. On the front panel are all the device LEDs.
The following figure illustrates the PowerConnect 3448 back panel:

Figure 2-4. PowerConnect 3448 Back Panel

Power Connector
Console Port
RPS Connector
The back panel contains an RPS connector, console port and power connector.

SFP Ports

The Small Form Factor Plugable (SFP) ports are a Two-Wire Serial Interface (TWSI) for
communication via a Complex Programmable Logic Device (CPLD) which is designated as
1000Base-SX or LX.

RS-232 Console Port

One DB-9 connector for a terminal connection is used for debugging, software download etc. The
default baud rate is 9,600 bps. The baud rate can be configured from 2400 bps up to 115,200 bps.

Figure 2-5. Console Port

39
Hardware Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents