Dell PowerConnect 3424 User Manual page 148

Figure 6-34. Hosts Name Mapping Table
Removing Host Name from IP Address Mapping
1
Open the Host Name Mapping page.
2
Click Show All.
3
The Host Mapping Table page opens.
4
Select a Host Name Mapping Table entry.
5
Check the Remove checkbox.
6
Click Apply Changes.
The Host Mapping Table entry is deleted, and the device is updated.
Mapping IP addresses to Domain Host Names Using the CLI Commands
The following table summarizes the equivalent CLI commands for mapping Domain Host names
to IP addresses.
Table 6-35. Domain Host Name CLI Commands
CLI Command
ip host name address
no ip host name
clear host {name | *}
show hosts [name]
The following is an example of the CLI commands:
console(config)# ip host accounting.abc.com 176.10.23.1
148
Configuring System Information
Description
Defines the static host name-to-address mapping in the host cache
Removes the name-to-address mapping.
Deletes entries from the host name-to-address cache.
Displays the default domain name, list of name server hosts, the
static and the cached list of host names and addresses.