Figure 7-10. Add MAC Based ACLs
3
Define the fields.
4
Click Apply Changes.
The MAC-based ACL is defined, and the device is updated.
Displaying ACL-Specific ACEs
1
Open the MAC Based ACL page.
2
Select an ACL.
3
Click Show All.
The ACEs Associated with MAC ACL page opens.
Removing ACLs
1
Open the MAC Based ACL page.
2
Select an ACL.
3
Click Show All.
The ACEs Associated with MAC ACL page opens.
4
Check the Remove ACL checkbox.
242
Configuring Switch Information
NOTE:
ACLs can be removed only if they are not bound to an interface.