Dell PowerConnect 3424 User Manual page 192

The following is an example of the CLI commands:
Console(config)# snmp-server enable traps
Console(config)# snmp-server trap authentication
Console# show snmp
Community-String Community-Access
---------------- -----------------
public
Community-String Group name
---------------- ----------
Traps are enabled.
Authentication-failure trap is enabled.
Version 1,2 notifications
Target
Address
-------
Version 3 notifications
Target
Address
--------
System Contact: Robert
System Location: Marketing
192
Configuring System Information
read only
Type Community Version
---- --------- -------
Type Username
---- --------- -------- ----
View name
---------
view-1
IP address
----------
Udp Filter
Port name
---- ------ ---
Security Udp Filter
Level Port name
------
- -
IP address
----------
All
Type
----
To Retries
Sec
-------
To Retries
Sec
--- -------