Dell PowerConnect 3424 User Manual page 209

SNMPv1,2 — SNMP versions 1 and 2 are enabled for the selected recipient. Define the following
fields for SNMPv1 and SNMPv2:
Community String (1-20 Characters) — Identifies the community string of the trap
manager.
Notification Version — Determines the trap type. The possible field values are:
SNMP V1 — SNMP Version 1 traps are sent.
SNMP V2 — SNMP Version 2 traps are sent.
SNMPv3 — SNMPv3 is used to send and receive traps. Define the following fields for SNMPv3:
User Name — The user to whom SNMP notifications are sent.
Security Level — Defines the means by which the packet is authenticated. The possible field
values are:
No Authentication — The packet is neither authenticated nor encrypted.
Authentication — The packet is authenticated.
Privacy — The packet is both authenticated and encrypted.
UDP Port (1-65535) — The UDP port used to send notifications. The default is 162.
Filter Name — Includes or excludes SNMP filters.
Timeout (1-300) — The amount of time (seconds) the device waits before resending informs.
The default is 15 seconds.
Retries (1-255) — The amount of times the device resends an inform request. The default is 3.
Remove Notification Recipient — When checked, removes selected notification recipients.
Adding a new Trap Recipients
1
Open Notification Recipients page.
2
Click Add.
The Add Notification Recipients page opens:
Configuring System Information
209