Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Select Authentication page.
Table 6-41. Select Authentication CLI Commands
CLI Command
enable authentication
[default | list-name]
login authentication [default
| list-name]
ip http authentication
method1 [method2.]
ip https authentication
method1 [method2.]
show authentication methods Displays information about the authentication methods.
The following is an example of the CLI commands:
console(config-line)# enable authentication default
console(config-line)# login authentication default
console(config-line)# exit
console(config)# ip http authentication radius local
console(config)# ip https authentication radius local
console(config)# exit
console# show authentication methods
Login Authentication Method Lists
---------------------------------
Console_Default
Network_Default
Enable Authentication Method Lists
----------------------------------
Console_Default
Network_Default
Description
Indicates the authentication method list when accessing
a higher privilege level from a remote Telnet, Console or
SSH.
Indicates the login authentication method list for a
remote Telnet, Console or SSH.
Indicates authentication methods for HTTP servers.
Indicates authentication methods for HTTPS servers.
: None
: Local
: Enable
None
: Enable
Configuring System Information
169