Dell PowerConnect 3424 User Manual page 269

Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for aging, querying, and sorting
dynamic addresses as displayed in the Dynamic MAC Address.
Table 7-72. Query and Sort CLI Commands
CLI Command
bridge aging-time seconds
show bridge address-table
[vlan vlan ] [ethernet
interface | port-channel
port-channel-number ]
The following is an example of the CLI commands:
console (config)# bridge aging-time 250
console (config)# end
console# show bridge address-table
Aging time is 250 sec
vlan mac address
---- -----------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
200 00:10:0D:48:37:FF
Description
Sets the address table aging time.
Displays classes of dynamically created
entries in the bridge-forwarding database.
port
----
1/e8
1/e8
1/e8
type
----
dynamic
dynamic
static
Configuring Switch Information
269