Configuring an Authentication Profile Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Authentication Profiles page.
Table 6-40. Authentication Profile CLI Commands
CLI Command
aaa authentication login
{default | list-name} method1
[method2.]
no aaa authentication login
{default | list-name}
The following is an example of the CLI commands:
console(config)# aaa authentication login default radius local
enable none
console(config)# no aaa authentication login default
Selecting Authentication Profiles
After Authentication Profiles are defined, the Authentication Profiles can be applied to
Management Access methods. For example, console users can be authenticated by Authentication
Method List 1, while Telnet users are authenticated by Authentication Method List 2. To open the
Select Authentication page, click System→ Management Security→ Select Authentication in the
tree view.
166
Configuring System Information
Description
Configures login authentication.
Removes a login authentication profile.