Dell PowerConnect 3424 User Manual page 333

Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands
The following table summarizes the equivalent CLI commands for managing LAGs and ports
attached to Multicast routers as displayed on the Bridge Multicast Forward All page.
Table 7-93. CLI Commands for Managing LAGs and Ports Attached to Multicast Routers
CLI Command
show bridge multicast filtering
vlan-id
bridge multicast forward-all {add
| remove} {ethernet interface-
list | port-channel port-channel-
number-list}
The following is an example of the CLI commands:
Console(config)# interface vlan 1
Console(config-if)# bridge multicast forward-all add ethernet
1/e3
Console(config-if)# end
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN:
Port
-------
1/e11
1/e12
1/e13
Description
Displays the Multicast filtering
configuration.
Enables forwarding of all Multicast packets
on a port. Use the no form of this
command to return to default.
Forward-All
Static
-----------------
Forbidden
Forward
-
Status
-----------
Filter
Forward(s)
Forward(d)
Configuring Switch Information
333