Dell PowerConnect 3424 User Manual page 191

Enabling SNMP Notifications
1
Open the SNMP Global Parameters page.
2
Select Enable in the SNMP Notifications field.
3
Click Apply Changes.
SNMP notifications are enabled, and the device is updated.
Enabling Authentication Notifications
1
Open the SNMP Global Parameters page.
2
Select Enable in the Authentication Notifications field.
3
Click Apply Changes.
Enabling SNMP Notifications Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
SNMP Global Parameters page.
Table 6-48. SNMP Notification Commands
CLI Command
snmp-server enable traps
snmp-server trap
authentication
show snmp
snmp-server engine ID local
{engineid-string | default}
Description
Enables the router to send Simple Network
Management Protocol traps
Enables the router to send Simple Network
Management Protocol traps when authentication
fails
Checks the status of SNMP communications.
Indicates the local device engine ID. The field
values is a hexadecimal string. Each byte in
hexadecimal character strings is two hexadecimal
digits. Each byte can be separated by a period or
colon. The Engine ID must be defined before
SNMPv3 is enabled.
Configuring System Information
191