Dell PowerConnect 3424 User Manual page 240

The Port Security Table contains the additional following fields:
Unit No. — Specifies the stacking unit for which locked port information is displayed.
Copy Parameters from — Copies parameters to the selected unit number.
Configuring Locked Port Security with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Locked Port
security as displayed in the Port Security page.
Table 7-64. Port Security CLI Commands
CLI Command
shutdown
set interface active {ethernet
interface | port-channel port-
channel-number}
port security learning
{disabled | dynamic}
port security max max-addr
port security [forward |
discard | discard-shutdown]
[trap seconds]
show ports security {ethernet
interface | port-channel port-
channel-number}
The following is an example of the CLI commands:
console # show ports security
Port
-----
1/e1
1/e2
1/e3
240
Configuring Switch Information
Description
Disables interfaces.
Reactivates an interface that is shutdown due to
port security reasons.
Defines the locked port type.
Specifies the number of MAC address that
can be learned on the port.
Locks learning of new addresses on an interface.
Displays port lock status.
Status Action
------- -------
locked Discard
locked Discard,
Shutdown
Unlocked -
Trap Frequency
------- ---------
Enable 100
Disable
- -
Counter
--------
88
-