Switching From The Stack Master To The Backup Stack Master; Figure 1-6. Powerconnect 3448/P Port Replaces Powerconect 3424/P Port - Dell PowerConnect 3424 User Manual

Figure 1-6. PowerConnect 3448/P port replaces PowerConect 3424/P Port

Switching from the Stack Master to the Backup Stack Master

The Backup Master replaces the Stack Master if the following events occur:
• The Stack Master fails or is removed from the stack.
• Links from the Stack Master to the stacking members fails.
• A soft switchover is performed with either via web interface or the CLI.
Switching between the Stack Master and the Backup Master results in a limited service loss. Any
dynamic tables are relearned if a failure occurs. The running configuration file is synchronized
between Stack Master and the Backup Master, and continues running on the Backup Master.
Same
Configuration
Same
Configuration
Introduction
27