Dell PowerConnect 3424 User Manual page 119

Modifying an SNTP Server
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table opens.
3
Select an SNTP Server entry.
4
Modify the relevant fields.
5
Click Apply Changes.
The SNTP Server information is updated.
Deleting the SNTP Server
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table opens.
3
Select an SNTP Server entry.
4
Select the Remove check box.
5
Click Apply Changes.
The entry is removed, and the device is updated.
Defining SNTP Servers Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Server page.
Table 6-22. SNTP Server CLI Commands
CLI Command
sntp server ip-
address|hostname [poll] [key
keyid]
The following is an example of the CLI commands:
Console(config)# sntp server 100.1.1.1 poll key 10
Description
Configures the device to use SNTP to request and
accept SNTP traffic from a server.
Configuring System Information
119