Dell PowerConnect 3424 User Manual page 220

Destination — Indicates the destination configuration file to which the source file is copied.
Files cannot be copied to the Backup Master's backup file. Backup files appear in the
Destination Unit field only if backup files have been defined. Select the New File Name
checkbox and indicate the name of the new file to copy the source file to a new backup
configuration file.
New File Name — Indicates the name of the newly created backup configuration file.
Restore Configuration Factory Defaults — When selected, indicates that the current
configuration settings should be replaced by the factory configuration default settings. When clear,
indicates that the current configuration settings should be maintained.
Copying Files
1
Open the Copy Files page.
2
Define the Source and Destination fields.
3
Click Apply Changes.
The file is copied, and the device is updated.
Restoring Company Factory Default Settings
1
Open the Copy Files page.
2
Click Restore Configuration Factory Defaults.
3
Click Apply Changes.
The company factory default settings are restored, and the device is updated.
Copying and Deleting Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Copy Files page.
Table 6-58. Copy Files CLI Commands
CLI Command
copy source-url destination-url Copies any file from a source to a destination.
delete startup-config
220
Configuring System Information
Description
Deletes the startup-config file.