Dell PowerConnect 3424 User Manual page 181

Figure 6-51. TACACS+ Settings
The TACACS+ Settings page contains the following fields:
Host IP Address — Indicates the TACACS+ Server IP address.
Priority (0-65535) — Indicates the order in which the TACACS+ servers are used. The default is 0.
Source IP Address — The device source IP address used for the TACACS+ session between the
device and the TACACS+ server.
Key String (0-128 Characters) — Defines the authentication and encryption key for TACACS+
communications between the device and the TACACS+ server. This key must match the
encryption key used on the TACACS+ server. This key is encrypted.
Authentication Port (0-65535) — The port number through which the TACACS+ session occurs.
The default is port 49.
Timeout for Reply (1-30) — The amount of time that passes before the connection between the
device and the TACACS+ server times out. The field range is 1-30 seconds.
Status — The connection status between the device and the TACACS+ server. The possible field
values are:
Connected — There is currently a connection between the device and the TACACS+ server.
Not Connected — There is not currently a connection between the device and the
TACACS+ server.
Single Connection — Maintains a single open connection between the device and the TACACS+
server when selected
Configuring System Information
181