Table 6-12. Asset Cli Commands - Dell PowerConnect 3424 User Manual

Unit No. — Indicates the unit number for which the device asset information is displayed.
Service Tag — The service reference number used when servicing the device.
Asset Tag (0-16 Characters) — Indicates the user-defined device reference.
Serial No. — The device serial number.
Defining System Information
1
Open the Asset page.
2
Define the relevant fields.
3
Click Apply Changes.
The system parameters are defined, and the device is updated.
Initiating a Telnet Session
1
Open the Asset page.
2
Click Telnet.
A Telnet session is initiated.
Configuring device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields
displayed in the Asset page.

Table 6-12. Asset CLI Commands

CLI Command
hostname name
snmp-server contact text
snmp-server location text
clock set hh:mm:ss day month
year
show clock [detail]
show system id
show system
asset-tag text
show stack <1-6>
show system [unit unit]
show system id [unit unit]
Description
Indicates or modifies the device host name.
Sets up a system contact.
Enters information on where the device is located.
Manually sets the system clock and date.
Displays the time and date from the system clock.
Displays the service tag information.
Displays system information.
Sets the device asset tag.
Displays the system stack information.
Displays system information.
Displays system identity information.
Configuring System Information
89