Modifying a DHCP IP Interface
1
Open the DHCP IP Interface page.
2
Modify the fields.
3
Click Apply Changes.
The entry is modified, and the device is updated.
Deleting a DHCP IP Interface
1
Open the DHCP IP Interface page.
2
Click Show All.
The DHCP Client Table opens.
3
Select a DHCP client entry.
4
Select the Remove check box.
5
Click Apply Changes.
The selected entry is deleted, and the device is updated.
Defining DHCP IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining DHCP clients.
Table 6-32. DHCP IP Interface CLI Commands
CLI Command
ip address dhcp
[hostname host-name]
The following is an example of the CLI command:
console(config)# interface ethernet 1/e11
console(config-if)# ip address dhcp
Description
To acquire an IP address on an Ethernet interface from the
Dynamic Host Configuration Protocol (DHCP).
Configuring System Information
141