Dell PowerConnect 3424 User Manual page 139

Defining IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
IP Interfaces Parameters page.
Table 6-31. IP Interface Parameters CLI Commands
CLI Command
ip address ip-address {mask |
prefix-length}
no ip address [ip-address]
show ip interface [ethernet
interface-number | vlan vlan-
id | port-channel number]
The following is an example of the CLI commands:
console(config)# interface vlan 1
console(config-if)# ip address 92.168.1.123 255.255.255.0
console(config-if)# no ip address 92.168.1.123
console(config-if)# end
console# show ip interface vlan 1
Gateway IP Address
---------------------------------------
192.168.1.1
IP address
-------------------------------------------------
192.168.1.123/24
Description
Sets an IP address.
Removes an IP address
Displays the usability status of interfaces
configured for IP.
Activity status
Active
Interface
VLAN 1
Type
Static
Configuring System Information
139