Dell PowerConnect 3424 User Manual page 332

The Bridge Multicast Forward All page contains the following fields:
VLAN ID — Identifies a VLAN.
Ports — Ports that can be added to a Multicast service.
LAGs — LAGs that can be added to a Multicast service.
The Bridge Multicast Forward All Switch/Port Control Settings Table contains the settings for
managing router and port settings.
Managing Bridge Multicast Forward All Switch/Port Control Settings Table
The following table describes the controls used to set the port controls.
Table 7-92. Bridge Multicast Forward All Switch/Port Control Settings Table
Port Control
D
S
F
Blank
Attaching a Port to a Multicast Router or Switch
1
Open Bridge Multicast Forward All page.
2
Define the VLAN ID field.
3
Select a port in the Ports table, and assign the port a value.
4
Click Apply Changes.
The port is attached to the Multicast router or switch.
Attaching a LAG to a Multicast Router or Switch
1
Open Bridge Multicast Forward All page.
2
Define the VLAN ID field.
3
Select a port in the LAGs table, and assign the LAG a value.
4
Click Apply Changes.
The LAG is attached to the Multicast router or switch.
332
Configuring Switch Information
Definition
Attaches the port to the Multicast router or switch as a
dynamic port.
Attaches the port to the Multicast router or switch as a
static port.
Forbidden.
The port is not attached to a Multicast router or switch.