Displaying the Log File Table Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields
displayed in the Log File Table.
Table 6-27. Log File Table CLI Commands
CLI Command
show logging file
clear logging file
The following is an example of the CLI commands:
console# show logging file
Logging is enabled.
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 62 Logged, 62
Displayed, 200 Max.
File Logging: Level debug. File Messages: 11 Logged, 51
Dropped.
SysLog server 12.1.1.2 Logging: warning. Messages: 14
Dropped.
SysLog server 1.1.1.1 Logging: info. Messages: 0 Dropped.
01-Jan-2000 01:12:01 :%COPY-W-TRAP: The copy operation was
completed successfully
01-Jan-2000 01:11:49 :%LINK-I-Up: 1/e11
01-Jan-2000 01:11:46 :%LINK-I-Up: 1/e12
01-Jan-2000 01:11:42 :%LINK-W-Down: 1/e13
01-Jan-2000 01:11:35 :%LINK-I-Up: 1/e14
Description
Displays the logging state and the syslog messages
stored in the logging file.
Clears messages from the logging file.
Configuring System Information
129