Dell PowerConnect 3424 User Manual page 303

Deleting a VLAN
1
Open the VLAN Membership page.
2
Click the VLAN ID or VLAN Name option button and select a VLAN from the drop-down
menu.
3
Select the Remove VLAN check box.
4
Click Apply Changes.
The selected VLAN is deleted, and the device is updated.
Assigning Ports to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to
VLAN groups.
Table 7-82. Port-to-VLAN Group Assignments CLI Commands
CLI Command
switchport general acceptable-frame-
types tagged-only
switchport forbidden vlan {add vlan-
list | remove vlan-list}
switchport mode {access | trunk |
general}
switchport access vlan vlan-id
switchport trunk allowed vlan {add
vlan-list | remove vlan-list}
switchport trunk native vlan vlan-id
switchport general allowed vlan add
vlan-list [tagged | untagged]
switchport general pvid vlan-id
Description
Discards untagged frames at ingress.
Forbids adding specific VLANs to the
port.
Configures the VLAN membership mode
of a port.
Configures the VLAN ID when the
interface is in access mode.
Adds or removes VLANs from a trunk
port.
Defines the port as a member of the
specified VLAN, and the VLAN ID as the
port default VLAN ID (PVID).
Adds or removes VLANs for a port in
general mode.
Configures the PVID when the interface
is in general mode.
Configuring Switch Information
303