Dell PowerConnect 3424 User Manual page 198

Removing SNMP Groups
1
Open the Access Control Group page.
2
Click Show All.
The Access Table opens.
3
Select a SNMP group.
4
Check the Remove checkbox.
5
Click Apply Changes.
The SNMP group is deleted, and the device is updated.
Defining SNMP Access Control Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
Access Control Group page.
Table 6-50. SNMP Access Control CLI Commands
CLI Command
snmp-server group
groupname {v1 | v2 |
v3 {noauth | auth |
priv}} [read
readview ] [write
writeview ] [notify
notifyview ]
show snmp groups
[ groupname ]
The following is an example of the CLI commands:
console (config)# snmp-server group user-group v3 priv read user-
view
198
Configuring System Information
Description
Configure a new Simple Network Management
Protocol (SNMP) group, or a table that maps
SNMP users to SNMP views.
Displays the configuration of groups