Dell PowerConnect 3424 User Manual page 255

Configuring LAGs with CLI Commands
The following table summarizes the equivalent CLI commands for configuring LAGs as displayed
in the LAG Configuration page.
Table 7-68. LAG Configuration CLI Commands
CLI Command
interface port-channel port-channel-
number
description string
shutdown
speed bps
negotiation [capability1
[capability2...capability5]
back-pressure
flowcontrol {auto | on | off }
show interfaces configuration
[ethernet interface| port-channel
port-channel-number]
show interfaces status [ethernet
interface |port-channel port-
channel-number]
show interfaces description
[ethernet interface |port-channel
port-channel-number]
show interfaces port-channel [port-
channel-number]
Description
Enters the interface configuration mode of a
specific port-channel.
Adds a description to an interface
configuration.
Disables interfaces that are part of the
currently set context.
Configures the speed of a given ethernet
interface when not using auto negotiation.
Enables interface speed auto negotiation
operation.
Enables Back Pressure on a given interface.
Configures the Flow Control on a given
interface.
Displays the configuration for all configured
interfaces.
Displays the status for all configured
interfaces.
Displays the description for all configured
interfaces.
Displays Port-channel information (which
ports are members of that port-channel, and
whether they are currently active or not).
Configuring Switch Information
255