Dell PowerConnect 3424 User Manual page 329

Defining Ports to Receive Multicast Service
1
Open the Bridge Multicast Group page.
2
Define the VLAN ID and the Bridge Multicast Address fields.
3
Toggle a port to S to join the port to the selected Multicast group.
4
Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
5
Click Apply Changes.
The port is assigned to the Multicast group, and the device is updated.
Assigning LAGs to Receive Multicast Service
1
Open the Bridge Multicast Group page.
2
Define the VLAN ID and the Bridge Multicast Address fields.
3
Toggle the LAG to S to join the LAG to the selected Multicast group.
4
Toggle the LAG to F to forbid adding specific Multicast addresses to a specific LAG.
5
Click Apply Changes.
The LAG is assigned to the Multicast group, and the device is updated.
Managing Multicast Service Members Using CLI Commands
The following table summarizes the equivalent CLI commands for managing Multicast service
members as displayed in the Bridge Multicast Group page.
Table 7-91. Multicast Service Member CLI Commands
CLI Command
bridge multicast address {mac-multicast-
address | ip-multicast-address}
bridge multicast forbidden address
{mac-multicast-address | ip-multicast-
address}[add | remove] {ethernet
interface-list | port-channel port-
channel-number-list}
show bridge multicast address-table
[vlan vlan- id ] [address {mac-
multicast-address | ip-multicast-
address}] [format ip | mac]
Description
Registers MAC-layer Multicast
addresses to the bridge table, and adds
static ports to the group.
Forbids adding a specific Multicast
address to specific ports. Use the no
form of this command to return to
default
Displays Multicast MAC address table
information.
Configuring Switch Information
329