Copying Files - Dell PowerConnect 3424 User Manual

Working with the Active Image File Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Active Images.
Table 6-57. File Upload CLI Commands
CLI Command
boot system [unit | unit ]
{image-1 | image-2}
show version [unit unit]
The following is an example of the CLI commands:
Console# boot system image-1

Copying Files

Files can be copied and deleted from the Copy Files page. To open the Copy Files page, click
System→ File Management→ Copy Files in the tree view.
Figure 6-78. Copy Files
The Copy Files page contains the following fields:
Copy Configuration — When selected, copies either the running, startup or backup configuration
file of the Master file to the destination file.
Source — Indicates the type of file to be copied to the destination file. Select either the
Running Configuration, Startup Configuration or one of the user-defined Backup
Configuration files.
Description
Indicates the system image that the device loads at
startup.
Displays version information for the system
Configuring System Information
219