Dell PowerConnect 3424 User Manual page 328

The following table contains the IGMP port and LAG members management settings:
Table 7-90. IGMP Port/LAG Members Table Control Settings
Port Control
D
S
F
Blank
Adding Bridge Multicast Addresses
1
Open the Bridge Multicast Group page.
2
Click Add.
The Add Bridge Multicast Group page opens:
Figure 7-42. Add Bridge Multicast Group
3
Define the VLAN ID and New Bridge Multicast Address fields.
4
Toggle a port to S to join the port to the selected Multicast group.
5
Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
6
Click Apply Changes.
The bridge Multicast address is assigned to the Multicast group, and the device is updated.
328
Configuring Switch Information
Definition
The port/LAG has joined the Multicast group
dynamically in the Current Row.
Attaches the port to the Multicast group as static
member in the Static Row.
The port/LAG has joined the Multicast group
statically in the Current Row.
Forbidden.
The port is not attached to a Multicast group.