Dell PowerConnect 3424 User Manual page 355

Figure 8-8. RMON History Control
The RMON History Control page contains the following fields:
History Entry No. — Entry number for the History Control page.
Source Interface — Port or LAG from which the history samples were taken.
Owner (0-20 characters) — RMON station or user that requested the RMON information.
Max No. of Samples to Keep (1-50) — Number of samples to be saved. The default value is 50.
Current No. of Samples in List — Indicates the current number of samples taken.
Sampling Interval (1-3600) —Indicates the time interval in seconds, between what the samplings
are taken from the ports. The possible values are 1-3600 seconds. The default is 1800 seconds (30
minutes).
Remove — When checked, removes the History Control Table entry.
Adding a History Control Entry
1
Open the RMON History Control page.
2
Click Add.
The Add History Entry page opens.
3
Complete the fields in the dialog.
4
Click Apply Changes.
The entry is added to the History Control Table.
355
Viewing Statistics