Dell PowerConnect 3424 User Manual page 183

Figure 6-53. TACACS+ Table
Removing a TACACS+ Server
1
Open the TACACS+ Table page.
2
Click Show All.
The TACACS+ Table opens:
3
Select a TACACS+ Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in
theTACACS+ Settings page.
Table 6-46. TACACS+ CLI Commands
CLI Command
tacacs-server host {ip-address |
hostname} [single-connection]
[port port-number] [timeout
timeout] [key key-string] [source
source] [priority priority]
tacacs-server key key-string
tacacs-server timeout timeout
tacacs-server source-ip source
show tacacs [ip-address]
Description
Indicates a TACACS+ host.
Indicates the authentication and encryption key for all
TACACS+ communications between the device and the
TACACS+ server. This key must match the encryption used
on the TACACS+ daemon. (Range: 0 - 128 characters.)
Indicates the timeout value in seconds. (Range: 1 - 30.)
Indicates the source IP address. (Range: Valid IP Address.)
Displays configuration and statistics for a TACACS+ server.
Configuring System Information
183