Dell PowerConnect 3424 User Manual page 258

Enabling Storm Control
1
Open the Storm Control page.
2
Select an interface on which to implement storm control.
3
Define the fields.
4
Click Apply Changes.
Storm Control is enabled.
Modifying Storm Control Port Parameters
1
Open the Storm Control page.
2
Modify the fields.
3
Click Apply Changes
The Storm Control port parameters are saved to the device.
Displaying the Port Parameters Table
1
Open the Storm Control page.
2
Click Show All.
The Storm Control Settings Table opens:
Figure 7-17. Storm Control Settings Table
258
Configuring Switch Information