NOTE:
This list of user-defined configuration files only appears if the user had created backup
configuration files. For example, if the user copied the running configuration file to a user-defined
configuration file called BACKUP-SITE-1, this list appears on the File Upload to Server page and the
BACKUP-SITE-1 configuration file appears in the list.
Uploading Files
1
Open the File Upload to Server page.
2
Define the file type to upload.
3
Define the fields.
4
Click Apply Changes.
The software is uploaded to the TFTP server.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
File Upload to Server page.
Table 6-56. File Upload CLI Commands
CLI Command
copy source-url destination-url Copies any file from a source to a destination.
The following is an example of the CLI commands:
console# copy image tftp://10.6.6.64/uploaded.ros
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Copy: 4234656 bytes copied in 00:00:33 [hh:mm:ss]
01-Jan-2000 07:30:42 %COPY-W-TRAP: The copy operation was
completed successfully
Description
Configuring System Information
217