Dell PowerConnect 3424 User Manual page 204

Deleting Communities
1
Open the SNMPv1,2 Community page.
2
Click Show All.
The Community Table page opens.
3
Select a community and check the Remove check box.
4
Click Apply Changes.
The community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
SNMPv1,2 Community.
Table 6-52. SNMP Community CLI Commands
CLI Command
snmp-server community
community [ro | rw |
su] [ ip-address ][view
view-name ]
snmp-server
community-group
community group-name
[ ip-address ]
show snmp
The following is an example of the CLI commands:
Console (config)# snmp-server community dell ro 10.1.1.1
204
Configuring System Information
Description
Sets up the community access string to permit
access to the SNMP protocol.
Sets up community access string to permit
limited access to the SNMP protocol based on
group access rights.
Displays the current SNMP device
configuration.