Dell PowerConnect 3424 User Manual page 182

The TACACS+ default parameters are user-defined defaults. The default settings are applied to
newly defined TACACS+ servers. If default values are not defined, the system defaults are applied
to the new TACACS+ servers.
The following are the TACACS+ defaults:
Source IP Address — The default device source IP address used for the TACACS+ session
between the device and the TACACS+ server. The default source IP address is 0.0.0.0.
Key String (0-128 Characters) — The default key string used for authenticating and encrypting all
communications between the device and the TACACS+ server. This key is encrypted.
Timeout for Reply (1-30) — The default time that passes before the device and the TACACS+
server connection times out. The default is 5 seconds.
Adding a TACACS+ Server
1
Open the TACACS+ Settings page.
2
Click Add.
The Add TACACS+ Host page opens:
Figure 6-52. Add TACACS+ Host
3
Define the fields.
4
Click Apply Changes.
The TACACS+ server is added, and the device is updated.
Displaying the TACACS+ Table
1
Open the TACACS+ Settings page.
2
Click Show All.
The TACACS+ Table opens:
182
Configuring System Information