Dell PowerConnect 3424 User Manual page 230

Enabling Port Based Authentication Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the port based
authentication as displayed in the Port Based Authentication table.
Table 7-61. Port Authentication CLI Commands
CLI Command
aaa authentication dot1x
default method1 [method2.]
dot1x max-req count
dot1x re-authenticate
[ethernet interface]
dot1x re-authentication
dot1x timeout quiet-period
seconds
dot1x timeout re-authperiod
seconds
dot1x timeout server-timeout
seconds
dot1x timeout supp-timeout
seconds
dot1x timeout tx-period
seconds
show dot1x [ethernet
interface]
show dot1x users [username
username]
dot1x guest-vlan enable
dot1x guest-vlan
230
Configuring Switch Information
Description
Specifies one or more authentication,
authorization, and accounting (AAA) methods for
use on interfaces running IEEE 802.1X.
Sets the maximum number of times that the
device sends an EAP to the client, before restarting
the authentication process.
Manually initiates a re-authentication of all
802.1X-enabled ports or the specified 802.1X-
enabled port.
Enables periodic re-authentication of the client.
Sets the number of seconds that the device
remains in the quiet state following a failed
authentication exchange.
Sets the number of seconds between re-
authentication attempts.
Sets the time for the retransmission of packets to
the authentication server.
Sets the time for the retransmission of an EAP
request frame to the client.
Sets the number of seconds that the device waits
for a response to an EAP - request/identity frame,
from the client, before resending the request.
Displays 802.1X status for the device or for the
specified interface.
Displays 802.1X users for the device.
Enables using a guest VLAN for unauthorized
ports. If a Guest VLAN is enabled, the
unauthorized port automatically joins the
VLAN selected in VLAN List field. The field
default is disabled.
Contains a list of VLANs. The guest VLAN is
selected from the VLAN List