Dell PowerConnect 3424 User Manual page 344

Displaying Etherlike Statistics for an Interface
1
Open the Etherlike Statistics page.
2
Select an interface in the Interface field.
Resetting Etherlike Statistics
1
Open the Etherlike Statistics page.
2
Click Reset All Counters.
The Etherlike Statistics counters are reset.
Viewing Etherlike Statistics Using the CLI Commands
The following table contains the CLI commands for viewing etherlike statistics.
Table 8-96. Etherlike Statistics CLI Commands
CLI Command
show interfaces counters
[ethernet interface | port-
channel port-channel-number ]
The following is an example of the CLI commands.
Console# show interfaces counters ethernet 1/1
Port
----
1/e1
Port
----
1/e1
FCS Errors: 8
Single Collision Frames: 0
Multiple Collision Frames: 0
SQE Test Errors: 0
Deferred Transmissions: 0
Late Collisions: 0
344
Viewing Statistics
Description
Displays traffic seen by the physical
interface.
IN Octets InUcastPkts
--------- -----------
183892 1289
OUT Octets OutUcastPkts
---------- ------------
9188 9
InMcastPkts InBcastPkts
----------- -----------
987 8
OutMcastPkts OutBcastPkts
------------ ------------
8 0