Displaying the Port Based Authentication Table
1
Open the Port Based Authentication page.
2
Click Show All.
The Port Based Authentication Table opens:
Figure 7-2. Port Based Authentication Table
In addition to the fields in the Port Based Authentication Table also displays the following fields:
Unit No. — Selects a stacking member.
Copy Parameters from Port No. — Copies parameters a the selected port.
Copying parameters in the Port Based Authentication Table
1
Open the page.
2
Click Show All.
The Port Based Authentication Table opens.
3
Select the interface in the Copy Parameters from Port No. field.
4
Select an interface in the Port Based Authentication Table.
5
Check the Copy to check box to define the interfaces to which the Port based authentication
parameters are copied.
6
Click Apply Changes.
Configuring Switch Information
229