Mapping Domain Host - Dell PowerConnect 3424 User Manual

Powerconnect 34 series
Hide thumbs Also See for PowerConnect 3424:
Table of Contents

Advertisement

Defining DNS Domain Names Using the CLI Commands
The following table summarizes the CLI commands for configuring DNS domain names:
Table 6-34. DNS Domain Name CLI Commands
CLI Command
ip domain-name name
no ip domain-name
show hosts [name]
The following is an example of the CLI commands:
console(config)# ip domain-name dell.com

Mapping Domain Host

The Host Name Mapping page provides parameters for assigning IP addresses to static host
names. On this page, one IP address per host can be assigned. To open the Host Name Mapping
page, click System→ IP Addressing→ Host Name Mapping in the tree view.
Figure 6-32. Host Name Mapping
146
Configuring System Information
Description
Defines a default domain name that the software uses to
complete unqualified host names.
Disable the use of the Domain Name System (DNS).
Displays the default domain name, list of name server hosts,
the static and the cached list of host names and addresses.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents